4NWP100446R0001_OPM_ABB_AS400RelayCardPowerValue_EN140226
Page 9/15 ABB
Modifications reserved
Figure 5: Card Installation
1.4.2.1 Connecting the Card
To connect the card to the computer and start the configuration:
1. Plug the RJ-45 end of the supplied serial cable into the Settings port on the card
2. Plug the other end of the serial cable into the serial COM port on the computer.
Figure 6: Card Connection
1.4.2.2 Configuration
To configure the card:
1. Verify that the serial cable (supplied) is connected to the card's Settings port and the computer's COM
port.
2. Open your terminal emulation program (such as HyperTerminal). If you do not have it in your
computer, you can download it from our website:
http://www.newavenergy.com/files/hypertrm.zip
a. Start
à
All Programs
à
Accessories
à
Communications
à
Hyper Terminal
Figure 7: Hyperterminal path
b. Or type
HYPERTRM
in Windows OS Run Dialog
Figure 8: Hyperterminal through command window
