Configuration
Power Panel FT50 User's manual V1.19
79
User
Default setting: EMPTY (no username entered)
For access with authentication, a username must be entered here.
Password
Default setting: EMPTY (no password entered)
Input range: Max. 100 characters
For access with authentication, a password must be entered here.
The password is stored on the device in configuration file PFT50Config.xml .
Show password
Default setting: Disabled
Enabled
The password is displayed in the input field as plain text.
Disabled
The password is hidden in the input field by placeholder characters (●●●●●●).
7.1.1.14 Service page
Save & Exit
On this page, the settings currently made or modified on service pages can be saved using
Save
.
Exit
leaves the
service pages, and the Power Panel starts in the configured start mode (see
"Service page Startup" on page 56
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
Save changes & exit
Press to save changes and exit
Save changes
Press to save changes
Exit without saving
Press to exit without saving changes
Save changes & exit
(button)
All changes that have been made are saved and the Power Panel is started with the specified settings (see
Save changes
(button)
All changes made are saved. The service pages are not exited, and other settings can be made.
Exit without saving
(button)
Changes made are not saved and will be lost. The Power Panel starts as configured with the last settings that were
saved (see
