Connection and installation
Product manual 2CKA001373B8563
│17
5.3
Installation site
When selecting the installation location, ensure that there is a distance to sources of heat or
cold.
Heat or cold sources influence the function of the internal temperature sensor.
Fig. 6: Installation sites
The device should be mounted on a wall opposite the heat source. The distance to side walls or
door frames should be at least 50 cm. The distance to the floor should be about 150 cm.
■
Do not mount the device on the wall. Low outside temperatures have an effect on
temperature regulation.
■
The room temperature controller must not come into direct contact with liquids.
■
Do not mount the device in direct sunlight, near radiators, windows, light sources or behind
curtains.