Safety instructions
ATTENTION
! The Cassia ATX2000 Bluetooth gateway should be installed by technically
qualified personnel. Failure to install the gateway in compliance with applicable codes and
regulations and according to the manufacturer’s recommendations may result in
unsatisfactory performance or equipment failure.
Unpack the delivery
The Cassia ATX2000 kit consists of the materials listed below.
No.
Description
1
Data acquisition unit
2
4G cellular antennas (2 pieces)
3
Detailed manual - Extronics Configured Products
Group - IBR200 Variation installation and
operating manual
4
Wi-Fi and Bluetooth® antennas (3 pieces)
5
Mounting kit *
6
ABB Cassia ATX2000 Bluetooth Gateway quick
installation and start-up guide
7
ABB SIM card holder and activation leaflet**
* Mount ATX2000 according to Extronics Detailed manual.
**ABB SIM card can only be activated by an ABB personnel. For support contact ABB support:
support.powertrain@abb.com
For more information, see the extended manual -
Extronics Configured Products Group - IBR200
Variation installation and operating manual
.
Antenna installation
Install the antennas to the correct positions according to the information in the below table. Do
not over tighten the antennas. See an example of BLE socket fixed with iANT216-M antenna.
Ordering code
Description
4G Cellular antenna
Wi-Fi antenna
Bluetooth® antenna
3AXD50001019037
Cassia ATX2000
for EMEA
ATX-iANT213-QB
ATX-iANT216M
ATX-iANT216M
3AXD50001081164
Cassia ATX2000
for North America
ATX-iANT293-US
ATX-iANT216M
ATX-iANT216M
3AXD50001081157
Cassia ATX2000
for APAC
ATX-iANT213-QB
ATX-iANT216M
ATX-iANT216M
