INTRODUCTION
NOMENCLATURE
1 - 9
NOMENCLATURE
SPECIFICATIONS
WBPEEUI310008A0 CCAD01 Command CAD Configuration Tools
(Release 2.0)
WBPEEUI310013B0 WCAD01 Module Configuration Tools (Release 2.0)
NOTE:
1. Release 5.3 is recommended for 100% functionality.
Table 1-3. Nomenclature
Position
1
2
3
4
5
6
7
8
Type S L C
_
2
_ _ _
Strategic Loop Controller
Inputs
0
Standard inputs, no special input board
2
Two direct low level inputs in place of AI3 and AI4 (frequency/pulse
input included, switch selectable)
1,2
Serial Interface Connection
3
0
Front access
1
Front or termination board access
CE Mark
0
No CE Mark approval
A
CE Mark approval
0
Reserved for future use
NOTES:
1. An optional input board contains circuitry which allows DI3 to accept a frequency input and 2 temperature modules for direct temperature
inputs. Actual use of AI3, AI4 and DI3 remains jumper selectable with the option board installed.
2. Use of the option board does not change the I/O count of the controller. The optional input board contains circuitry for a frequency/pulse
input and 2 temperature modules for direct temperature inputs. Hardware jumpers (refer to
) and menu options permit selecting
the function of DI3, AI3 and/or AI4. Digital input DI3 may be used as a digital or frequency input. Analog input AI3 and AI4 are each selectable
as a high level or low level input.
3. Front access requires serial interface adapter Part No. 6643192_1
Table 1-4. Specifications
Property
Characteristic/Value
Inputs
Analog inputs:
Quantity available
Signal range
Input type
Input accuracy
A/D resolution
Input impedance
Common mode voltage limit
Common mode noise rejection
Ambient temperature effect
4
1-5 VDC, 4-20 mA
Isolated, self-calibrating; internally or externally powered
±0.2% of span
12 bits
>1 M
Ω
30 V rms maximum
-60 dB at 60 Hz, ±120 VAC rms or ±168 VDC
±0.2% of span/50°C
Table 1-2. Reference Documents
(continued)
Document No.
Title
