04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Page 36/78 ABB
Modifications reserved
6.4.1
Graphical display operation
For simple operation and configuration, the UPS is optionally delivered with a microprocessor-based touchscreen
display. The navigation, procedures and the features of the display are detailed in subsequent sections.
The touchscreen display enables the operator to perform the following:
• Check operational status and measurements
• Execute operational commands
• Monitor the power flow through the UPS system
• Check events and alarm history
• Silence alarms
• Adjust programmable parameters
• Check the status of the batteries
6.4.2
Rear View
NOTE!
PLEASE NOTE THAT THE EMERGENCY SHUTDOWN FUNCTION BY PRESSING THE
BUTTONS ON/OFF 1 + ON/OFF 2 IS DISABLED.
Figure 17: Rear view
!