04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Page 41/78 ABB
Modifications reserved
UPS Measurements
Battery
Output Voltage (V)
Output Current (A)
Output Frequency (Hz)
Output Power (%)
Active Power (kW)
Reactive Power (kVAr)
Apparent Power (kVA)
Inverter Voltage (V)
Bypass Voltage (V)
Bypass Frequency (Hz)
Rectifier Voltage (V)
Booster Temperature (
o
C)
Inverter Temperature (
o
C)
Udc Gain +
Udc Gain -
Temperature (
o
C)
Discharge Current (A)
Charge Current (A)
Voltage (V)
Run Time
Capacity(%)
Commands
In this menu, the user can change the operating mode of the UPS. Once the command is executed, the user is
immediately directed to the mimic diagram where the new status of the UPS is indicated.
Command
Load to inverter
Load to bypass
Battery test
Deep battery test
Abort battery test
Perform alarm test
UPS Data
This menu gives access to information regarding the manufacturing of the UPS.
UPS Data
Serial Number
Manufacturing
Firmware Version
Hardware Version
Display Version
User
This menu enables the user to program battery tests and to configure operations using generators. It also allows to
set the time and date and the selection of the language of the display.
User Settings
Language
Date
Time
Battery Test
Repeat Test
Generator Operation