04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Page 73/78 ABB
Modifications reserved
10.6 USER INTERFACE - COMMUNICATION
System Display
7” touchscreen display (one per frame)
DPA display (or module display)
2 x 20 character LCD display (one per module)
MIMIC diagram
LED-indicator, 5x green/red LEDS (one per module)
RS232 on Sub-D9 port
RS232 on USB port
For monitoring and integration in network management
Customer Interfaces : Inputs
DRY PORT
1 Remote Shut down [EMERGENCY OFF (Normally closed)]
1 GEN-ON (Normally open)
1 Programmable Customer’s Inputs (Normally open)
1 Temp. Sensor for Battery Control
Customer Interfaces : Outputs
DRY PORT
6 voltage free contacts
For remote signaling and automatic computer shutdown
RS485 on RJ45 port
Remote monitoring system with remote panel (graphical
display)
Optional
RS485 on RJ45 port
For multidrop purpose
Optional
Slot for SNMP
SNMP card
For monitoring and integration in network management
Optional
10.6.1 System Display
The user-friendly touchscreen graphical display on the system level offers the opportunity of directly monitoring the
system status as well as the status of each individual module. The graphical display additionally provides all the
measurements (module and system level) and the user is able to transfer from INVERTER to BYPASS and vice-
versa. All other commands must be performed on the DPA display. With both displays in place (module and system
level), the UPS offers full user friendliness without making compromises on robustness.