6
7.3 RSD 200
Table 3:
8. Lubrication
8.1 Mounting position and oil level
Prior to delivery the actuator is filled with the oil quantity specified for orientation IMV 1. When mounting
the actuator in another orientation, fill in the missing oil.
8.1.1 RSD 10 / RSD 20
Fig. 3:
oil level; 1) = inspection screw, 2) = venting screw.
Table 4:
RSD 200-0,7
RSD 200-5,0
Rated pos. force [kN]
200
Stand stil force [kN]
aprox. 1.2 x rated force (break-away for a short time in end
positions 2 x rated force)
Positioning speed [mm/s]
0.1 ... 0.7
0.1 ... 5.0
Servo motor
MC 90 BA
MC 112 BA
Weight:
max stroke 180 mm
max. stroke 300 mm
approx. 400 kg
approx. 460 kg
approx. 400 kg
approx. 460 kg
Electronic unit
for field installation
for rack installation
EBN 853
EBS 852
EBN 861
EBS 862
Voltage supply
(at electronic unit)
AC 115 V
(94 V ... 130 V) or
AC 230 V (190 V ... 260 V);
47.5 ... 63 Hz
AC 230 V
(190 V ... 260 V);
47.5 ... 63 Hz
max. current (AC 115 /AC 230 )V
at electronic unit: [A]
5.0 A / 2,5 A
-- / 13.5 A
Current during positioning
approx. 40% ... 50% of I
max.
IMV 1
IMV 3
IMB 5
IMB 5
1)
1)
1)
1)
1)
2)
2)
2)
2)
(r00017xa)
Type
RSD 10 / RSD 20
RSD 10 / RSD 20
RSD 10 / RSD 20
RSD 10 / RSD 20
oil quantity, approx. [ltr]
max. stroke 100 mm
max. stroke 300 mm
3.8
6.4
5.4
8.8
3.8
6.4
3.8
6.7
oil level [mm] below
inspection screw with fully
retracted thrust rod
40 (0)
0
28
75
