Instruction IN/RandC/003–EN Rev.A
ControlMaster controllers and indicators
ConfigPilot
Creating, uploading and downloading configurations
Measurement made easy
1 Introduction
A configuration for a ControlMaster (both controller and
indicator) can be created, modified and backed up to a
PC using the ConfigPilot software program.
ConfigPilot is a utility used in conjunction with a USB
IrDA adaptor and can be downloaded from:
www.abb.com/recorders
.
2 Items required
2.1 ConfigPilot kit
3 Firmware revision
The following instrument firmware revisions are compatible with
ConfigPilot:
Description Part
no.
USB IrDA adaptor
B12895
This publication
IN/RandC/003-EN
Table 2.1 ConfigPilot kit CM30/0715
Instrument Firmware
revision
CM15
CM15|P2|00|02|22
CM15|P2|01|02|22
or later
CM10
CM10|P2|00|02|22
CM10|P2|01|02|22
or later
CM30
CM30|P2|00|02|22
or later
CM50
CM50|P2|00|02|22
or later
CMF160
CMF160|P2|00|02|22
or later
CMF310
CMF310|P2|00|02|22
or later
Table 3.1 Instrument firmware revisions
IMPORTANT (NOTE)
If using an earlier firmware
revision, contact your local ABB representative for more
information.
