ABB CRB 1100 Product Manual Download | Manualshive

Page: 679 / 720

background image

6.5 Calibrating with Wrist Optimization method

When to run Wrist Optimization

Wrist Optimization

routine is run to improve TCP reorientation performance.

Calibrating the robot with standard calibration method overwrites the optimized
positions of axes 4, 5, 6. Re-run the

Wrist Optimization

routine after standard

calibration to re-achieve the optimized positions of the wrist axes.

Overview of the calibration procedure on the FlexPendant

The actual instructions of how to perform the calibration procedure and what to
do at each step is given on the FlexPendant. You will be guided through the
calibration procedure, step by step.

Use the following list to learn about the calibration procedure before running the
RobotWare program on the FlexPendant. It gives you a brief overview of the
calibration procedure sequence.

After the calibration method has been called for on the FlexPendant, the following
sequence will be run.

1 Choose calibration routine Wrist Optimization.

2 Modify targets for 4-point tool frame definition, in Wrist Optimization routine.

Tip

Select positions with large reorientations around the TCP. For best results,
make sure that axis 4 and 5 have large movements.

en0400000906

a

Jog the robot to an appropriate position,
A, for the first approach point.
Use small increments to accurately posi-
tion the tool tip as close to the reference
point as possible.

b Tap

Modify Position

to define the point.

c

Repeat for each approach point to be
defined, positions B, C, and D.
Jog away from the fixed world point to
achieve the best result. Just changing the
tool orientation will not give as good a
result.

3 Improved calibration data to the wrist axes is identified and presented.

4 Optimized positions for the wrist axes are presented.

Continues on next page

Product manual - CRB 1100

679

3HAC078007-001 Revision: J

© Copyright 2021-2023 ABB. All rights reserved.

6 Calibration

6.5 Calibrating with Wrist Optimization method

«
...
677
678
679
680
681
...
»

Summary of Contents for CRB 1100

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CRB 1100

Mi Robot Builder Rover

Brand: Xiaomi Pages: 8

Brand: SunFounder Pages: 50

Brand: SimLab Pages: 37

Brand: OSOYOO Pages: 41

Brand: OSOYOO Pages: 58

Brand: Kogan Pages: 9

GENTLE DUO MINI

Brand: UBIROS Pages: 11

MOTOMAN MYS450L

Brand: YASKAWA Pages: 62

Brand: EastPoint Pages: 16

Brand: QUANTUM ROBOTIC SYSTEMS Pages: 11

Brand: Doosan Pages: 253

Brand: ABB Pages: 90

Brand: SAKE ROBOTICS Pages: 5

Brand: PadBot Pages: 17

Brand: Wido Pages: 4

Brand: Polaris Pages: 72

Brand: Mobile Industrial Robots Pages: 56

RP6v2 CONTROL M256 WiFi

Brand: Global Specialties Pages: 142

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands