Jogging the robot to oil filling position
Note
Action
Turn on the electric power to the robot.
1
If the robot is not connected to the controller,
power must be supplied to the connector R1.MP
according to
Supplying power to connector R1.MP
xx2000001519
Jog the robot to the specified position:
•
Axis 1: 0°
•
Axis 2: -67.5
•
Axis 3: 0°
•
Axis 4: 0°
•
Axis 5: 0°
•
Axis 6: No significance.
2
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the safeguarded
space.
3
Refilling oil to axis-2 gearbox
Note
Action
WARNING
Handling gearbox oil involves several
safety risks, see
1
CAUTION
The gearbox can contain an excess of
pressure that can be hazardous. Open the
oil plug carefully in order to let the excess
pressure out.
2
Continues on next page
Product manual - CRB 1300
319
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Summary of Contents for CRB 1300
