ABB DB BREAKER, Retrofitting Manual

5

Note:  If any unusual resistance is detected that 
could be abnormal interference between the CiC 
adapter and the switchgear cell parts stop 
immediately and retract the CiC adapter.  
Examine what is causing the interference and 
correct the situation.

Ÿ

Once the cradle is fully racked in Drill
Holes on the side wall of switchgear  
as shown in (fig. 8). 

•

Use provided flat head taptite screws to  
permanently lock the breaker with 
switchgear as shown in (fig. 9).

•

Remove all the tools and equipment used 
for the CiC adapter installation and clean off 
any processing residues and metal scraps.

Ÿ

Rack-in the CiC adapter into switchgear    
using DB rack-in/out leverage tool. 
(Legacy DB-Leverage tool) 

Fig. 6

Fig. 8

Fig. 9

Ÿ

Once the CiC adapter is fully pushed into the
switchgear cell Manually, unlock the extension     
rails and remove them from cell (fig. 6).  

as shown in (fig. 7). 

Fig. 7

•

Insert Emax 2 Circuit breaker, refer to the  
Emax 2 manual 1SDH001000R002  

•

Assemble back the door assembly after  
modifying door refer 2TSA451042P1000