54
DPA 2 50 S 4 50 - 2 50 K W
O P ER AT I N G M A N UA L
—
8 Packing, transportation & storage
This chapter contains all the necessary information for the correct packing, transportation and un-
packing of the UPS.
NOTE
WARNING
IF THE UPS IS NOT IMMEDIATELY INSTALLED THE FOLLOWING GUIDELINES MUST BE FOLLOWED:
TRANSPORT:
THE UPS CABINET CAN FALL OVER. USE THE SHIPPING BRACKETS ON THE REAR AND FRONT TO SECURE
THE CABINETS. DO NOT TILT THEM MORE THAN 10° FROM VERTICAL, OTHERWISE CABINETS MAY TIP
OVER.
POTENTIAL DANGERS:
- TILTING THE CABINET MIGHT DAMAGE THE SYSTEM AND THEREFORE SHOULD NO LONGER BE
CONNECTED TO THE MAINS.
- WEIGHT OF THE UPS SYSTEM COULD CAUSE SERIOUS INJURIES TO PEOPLE OR ANYTHING IN THE
SURROUNDING AREA.
STORAGE:
- THE UPS SHOULD BE STORED IN THE ORIGINAL PACKING AND SHIPPING CARTON
- THE RECOMMENDED STORING TEMPERATURE FOR THE UPS SYSTEM AND BATTERIES IS B20
°C AND +25°C. INDOOR AREA THAT IS RELATIVELY FREE OF CONDUCTIVE CONTAMINANTS
- THE UPS SYSTEM AND THE BATTERY SETS MUST BE PROTECTED FROM HUMIDITY < 95% (NON-
CONDENSING)
The UPS and accessories are delivered on a spe-
cifically designed pallet that is easy to move with
a forklift or a pallet jack. Always keep the UPS in
an upright position and do not drop the equip-
ment.
Check before transporting the surface loading
and use an adequate forklift to move the equip-
ment to the final position.
For the weights refer to the technical data sheet.
WARNING
BE CAREFUL OF THE HEAVY WEIGHT
OF THE UNIT
—
8.1 Packing & transportation
—
8.1-1
—
8.1-1: Forklift for
transportation