82
ACH550-UH User’s Manual
1703
OVERRIDE SPEED
-30.000…30.000 rpm
1
0
Defines a preset speed for the override.
Note! Set this value if motor control mode (Par.9904) is
VECTOR
:
SPEED
(1).
1704
OVERR PASS CODE
0…65535
1
0
Entering the correct override pass code unlocks parameter 1705 for one change.
• Enter the pass code always before changing the value of the parameter 1705.
• See parameter 1705 below.
• The pass code is 358.
• The entry reverts back to zero automatically.
1705
OVERRIDE ENABLE
0…1
1
0
Selects whether the override is enabled or disabled.
0 =
OFF
– Override disabled.
1 =
ON
– Override enabled.
• When enabled, the drive stores the values of all parameters into an override parameter set (see parameter
9902) and the parameters in Group 17 will be write protected (except parameter 1704). To change the
other parameters in the Group 17, override has to be disabled.
Group 17: Override
Code
Description Range
Resolution
DefaultS