EL3000
CONTINUOUS GAS ANALYZERS | OI/EL3000-EN REV. D
155
Configuring the user interface language
Downloading the language file to the gas analyzer
Requirements:
The ECT software tool (‘Configurator’) is installed on the
computer, and the current language files are saved in the
‘C:\Program Files (x86)\Analyze IT\ECT\Languages’ folder.
1. Open the ECT software tool.
2. In the ‘Options’ menu, either click on the ‘Communication
Properties…’ command or select the
icon on the toolbar.
3. In the ‘Communication Properties’ dialog, enter either the
network name (server name) or the IP address of the gas
analyzer.
4. Close the dialog by clicking ‘Ok’.
5. In the ‘File’ menu, either click on the ‘Receive Data’ command
or select the
icon on the toolbar.
The configuration data is transferred from the gas analyzer
to the computer.
6. In the ‘Options’ menu, either click on the ‘Send Language
File…’ command or select the
icon on the toolbar.
7. In the ‘Send Language File’ dialog under ‘Select Language’,
click on the drop-down field and select the desired language.
8. Close the dialog by clicking ‘Ok’.
The selected language is transferred from the computer to
the gas analyzer.
