7
E K I P E - H U B
G E T T I N G S TA R T ED
—
Ekip Connect 3
Wizard
Initial activities
A)Update Ekip Connect 3 to the latest version.
B)To simplify the identification of devices for Ekip Connect during configuration, ABB strongly suggests that each device in
the system be provided with a Tag Name.
C)Enable TFTP upload setting by dip-switch.
Ekip Connect uses some local ports for data communication with the device:
• Port 502 TCP, Modbus TCP Communication
• Port 69 UDP, TFTP Communication
Note:
While the devices provisioning process is running into ABB Ability EDCS, be sure your firewall is properly configured, according to
active ports reported above. If you encounter communication issues, try to disable your firewall temporarily, enabling it again at
the end of the provisioning process.
For the internet connection you must ensure that the following ports are open:
• 443/TCP: needed for the upload of the data via HTTPS
• 53/UDP: needed for public DNS
• 123/UDP: if needed to use NTP server synchronization time
Switch up
the 6
th
DIP
Summary of Contents for Ekip E-Hub
Page 2: ...1 EKIP E HUB GETTING STARTED...
Page 15: ...14...