2TFP900034A1001 ECN000087106 Rev. A
Ekip E-Hub | 20
AI setting
Click
IO setting
to enter I/O setting page, then select
Analog
tab to configure AI
channels.
Channel 0…3 for current analog input and 4…7 for voltage analog input.
Click
Add sensor
to enable the setting channel if there is no sensor set at this position.
Click
Edit
to do the AI channel configuration.
Fig. 15
Parameters
Parameters
Description
Default
Name
AI channel name
AI Channel No.
Input type
AI input types for this channel.
Current AI: 0 mA to 20 mA and 4 mA to 20
mA
Voltage AI: -10 V to +10 V
0 V to +10 V
-2.5 V to +2.5 V
0 V to +2.5 V
Current AI: 0 mA to 20 mA
Voltage AI: -10 V to +10 V
Unit
Unit for the measurement
N/A
Min
Minimum value for the measurement,
corresponding to the lower bound of input
type.
0
Max
Maximum value for the measurement,
corresponding to the upper bound of input
type.
100
NOTE
: Please configure the AI channels according to the real environment. The
AI channels data will be upload to the cloud after finishing the provision process.