2TFP900034A1001 ECN000087106 Rev. A
Ekip E-Hub | 25
11 -
Provision with Ekip Connect 3
Provision
Step
Description
1
Initial activities
In order to simplify the identification of devices for Ekip Connect during
provisioning, it is strongly suggested that each device in the system is provided
with a Tag Name.
Verify that Ekip E-Hub is functioning correctly and that it has obtained an IP
address from the connected network.
Update Ekip Connect 3 to the latest version.
Enable TFTP upload setting by dip-switch
2
Go to the Ekip Connect 3 home page.
Click
Activate and
Click
Select to access
to access ABB Ability™ EDCS.
Fig. 18
3
Insert the “myABB” credentials, then click
Login and Start.
If you don’t have a “myABB” account, click
Sign Up to get one.
Fig. 19