Endura AZ series integral and remote transmitter
Combustion oxygen monitor
5 Programming
30
IM/AZ20E–EN Rev. F
5.3 Passwords and Security Options
Passwords can be set to enable secure end-user access at two levels:
Standard
and
Advanced
. The
Service
level is reserved for factory use only. The
Read Only
level does not require password access.
Passwords are changed or restored to their default settings at the
Device Setup
/
Security Setup
parameter
– see page 47.
5.3.1 Accessing Secure Levels and Entering Passwords
All levels are selected from the
Access Level
screen and passwords for secure levels are entered at the
Enter Password
screen.
Advanced
users have full end-user configuration privileges to set and change passwords for
Standard
and
Advanced
level users. Each password can comprise up to 6 alphanumeric characters (selectable from the
Enter Password
screen – see page 31) and any mix of letters or digits.
Note.
During manufacture,
Standard
and
Advanced
level passwords are left unset and must be
user-allocated as required (when the transmitter is powered-up for the first time,
Standard
and
Advanced
levels can be accessed without password protection).
The
Service
level password is factory-set.
Notes.
There is no limit to the number of times a user can attempt to enter a password.
When allocating passwords, keep a copy and store in a safe location. It is not possible for
end-users to interrogate the transmitter to identify 'lost' passwords.
