Endura AZ series integral and remote transmitter
Combustion oxygen monitor
5 Programming
IM/AZ20E–EN Rev. F
31
Access Level
The
Access Level
is used to access menus at
Read Only
,
Standard
,
Advanced
and
Service
levels.
The
Access Level
screen is displayed by pressing
from
Operator
Page
(1 or 2).
To enter a password-protected level (
Standard
or
Advanced
), scroll to
the required level, and press
. Enter the password as described in
Enter Password
below.
To enter at
Read Only
level, press
at the
Access Level
screen. The
Enter Password
screen is bypassed and the (
Read Only
)
Calibrate
menu is displayed – see Section 5.4.2, page 36.
Note
. The
Logout
option is displayed when returning to
Access Level
from password-protected levels.
Enter Password
At the
Enter Password
screen, use the
and
keys to navigate
to individual password character(s).
Press
to select a password character.
When all password characters have been selected, press
.
If the password is correct, the requested level is accessed.
If the password is incorrect the last viewed
Operator Page
is displayed
with the
Locked
(
) icon in the status bar.
Note
. A default time-out period (within 5-minutes of exit) enables a user
to return to the
Operator
level and then re-enter the configuration menus
without re-entering the password. The configuration menu displayed at
exit is also remembered.
For periods in excess of 5 minutes, the password must be re-entered to
access the password-protected menus.
Table 5.4 Access Level and Enter Password Screens
Access Level
Read Only
Standard
Advanced
Service
Back
Select
Logout
******
R S T U V W X Y Z = 1 2 3 4 5 6 7
Next
OK
Enter Password
