Commissioning
Product manual
2CKA000073B5466
│
30
Pos.
Description
[1]
Device name
An independent designation for the device can be allocated via the text field.
[2]
Position
By tapping on the drop-down menu you can assign a position to the device in the
building structure you defined (e.g. assignment to a room on a certain floor).
[3]
Sensor configuration
The sensor is disabled by activating the checkbox. Additional operation via the sensor
is not possible.
■
Disable sensor
[4]
Links
Under the links you can create links, delete or edit links. You can also see for which
devices a link was created. A difference is made between links of channels and scenes.
■
A list opens when tapping on the plus icon in front of the actuator, channel or scene.
Create the desired link in the list by tapping the desired device.
■
The link can be deleted again by tapping on the dustbin icon.
[5]
Function
The function is selected automatically in dependence of the selected link. It can be
changed if necessary.
■
Control element
■
Movement detectors
■
Window contact
■
Heating / Cooling
■
Frost alarm
■
Rain alarm
■
Wind alarm
[6]
Parameters
Contact type
In this drop-down menu, the contact type can be selected. The following values are
available:
■
Normally closed contact
■
Normally open contact
Sensor type
In this drop-down menu, the sensor type can be selected. The following values are
available:
■
Push-button
– This sensor type is intended for operation with a mechanical push-button.
– Inverts the actuator status with every activation of the input (only rising edge).
■
Switch (reversing)
– Reverser and push-button invert the existing status of the actuator.
– With this type of sensor a classic 2 way circuit can be implemented. Here the
reverser inverts the actuator status during each change of the input signal (rising
and falling edge) and can be operated in combination with a mechanical reverser.
■
Switch (direct)
– This sensor type sends the value to the actuator, that is also attached to the
binary input, independent of the previous status of the actuator.
– This makes a 1:1 illustration possible, but no 2 way circuit can be implemented.
– Example: When a single lamp is to precisely follow the status of the contact of an
external movement detector or a mechanical switch.