There are hazards of electrical shocks and/ or
burns whenever working in or around electrical
equipment. Turn off power ahead of the
switchgear before performing any inspection or
maintenance operations. Check incoming line
terminals to verify that the equipment is
deenergized and grounded. Check out-going
terminals to ensure that no back-feed condition
exists.
Always work with the apparatus open and locked
so that it cannot be closed again, with the work
area insulated and made safe. All power supply
sources must be disconnected and made safe
against any reclosing during removal and
installation work.
DANGER
DANGER
—
MEDIUM VOLTAGE SERVICE
FSKII+
Addendum to FSKII+
Instruction for updating Manual Tripping
Should the customer’s personnel be in charge of
maintenance, the customer is responsible for any
operation performed on the apparatus. When
performing routine checks and maintenance
operations, deenergize all the components. Always
work with the apparatus open and locked so that it
cannot be closed again, with the work area insulated
and made safe. All power supply sources must be
disconnected and made safe against any reclosing
during removal and installation work. Read and
understand this manual before beginning
installation, commissioning, or operating the
product.
Index:
For your safety!
2
1. Scope
3
2. Kit composition
4
3. Instructions
5
