4
9AKK107991A0084 EN Rev. A
| HM/A 1.1, HM/A 2.1
—
TECHNICAL DATA
Removing the door plate cover
—
PROJECT PLANNING AND
OPERATING INFORMATION
The mounting location is governed by the respective
standards and directives (e.g. DIN VDE 0833-2,
BHE guideline for house alarm systems – type A).
If the house alarm system is used to implement
alarm signaling as required by building supervisory
authorities, the house alarm system must be set up
based on the DIN VDE 0833-2 standard.
Manual Call Points that are not in operation must be
marked with the “out of order” sign included in the
scope of delivery.
The door labeling can be changed.
To do this, remove the door plate cover as shown
and then refit it after inserting the required labeling
plate.
—
LEGEND
1
Gently press inward
