Description of application and parameters
Application "1-button blind"
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
│31
10.5.6 Extended parameters - Value for position Up (%)
NOTE
This parameter is only visible if the "Function switchover blinds/roller shutters"
parameter is set on blind.
Options:
0 ... 100
The position that a connected blind is to be raised to is set via this parameter. The associated 1-
byte "Move" communication object must hereby be connected with a 1-byte position object of a
blind actuator. Percentage values from 0% to 100% can be set in 1% steps. The value 0%
means travel up completely; the value 100% means travel down completely.
10.5.7 Extended parameters - Value for slat position Down (%)
NOTE
This parameter is only visible if the "Function switchover blinds/roller shutters"
parameter is set on blind.
Options:
0 ... 100
The position that a connected blind slat is to be opened to is set via this parameter. The
associated 1-byte "Adjust" communication object must hereby be connected with a 1-byte slat
position object of a blind actuator. Percentage values from 0% to 100% can be set in 1% steps.
The value 0% means opened completely; the value 100% means closed completely.
10.5.8 Extended parameters - Value for slat position Up (%)
NOTE
This parameter is only visible if the "Function switchover blinds/roller shutters"
parameter is set on blind.
Options:
0 ... 100
The position that a connected blind slat is to be closed to is set via this parameter. The
associated 1-byte "Adjust" communication object must hereby be connected with a 1-byte slat
position object of a blind actuator. Percentage values from 0% to 100% can be set in 1% steps.
The value 0% means opened completely; the value 100% means closed completely.