Description of application and parameters
Application "LED function"
KNX Technical Reference Manual 1473-1-8905 / 2CKA001473B8905
│77
10.19.9 General parameters - Threshold between Zone 2 and 3 (%)
NOTE
This parameter is only visible if the "Object type for status object" parameter is
set to 1 byte 0 - 100%.
Options:
1..98
The value for S1 is specified via the parameter "Threshold between Zone 2 and 3".
10.19.10 General parameters - Colour for Zone 3
NOTE
This parameter is only visible if the "Object type for status object" parameter is
set to 1 byte 0 - 100%.
Options:
Off
Yellow
Red-orange
Red
Violet
Blue
Green
White
If a value telegram is received on the 1-byte communication object "Status", the LED can switch
the colour. Whether the colour and to which colour will be switched to depends on the
parameter settings "Colour for Zone …".
Zone 3 has the following behaviour: zone 3:S1 ≤ value < S2.
10.19.11 General parameters - Threshold between Zone 3 and 4 (%)
NOTE
This parameter is only visible if the "Object type for status object" parameter is
set to 1 byte 0 - 100%.
Options:
1 … 98
The value for S2 is specified via the parameter "Threshold between Zone 3 and 4".