ABB i-bus
®
KNX
Parameters
352 2CDC508198D0211 Rev. A | AC/S 1.x.1
Object name
Data type
Pump A fault
DPT 1.005
The module has this output socket if the
Yes
option is selected for the
Pump display pump fault status
Outputs the fault status provided by the pump.
Signal value:
0 = No alarm
1 = Alarm
Pump A repair switch status
DPT 1.011
The module has this output socket if the
Yes
option is selected for the
Display pump repair switch status
Outputs the contact position provided by the pump repair switch.
Signal value:
0 = Inactive
1 = Active
Pump A override disable/enable
DPT 1.003
The module has this output socket if the
Yes
option is selected for the
Outputs whether the pump for the cooling distribution circuit is overridden.
Signal value:
0 = Disabled
1 = Enabled
Pump A override value
DPT 1.001
The module has this output socket if the
Yes
option is selected for the
Outputs the state with which the pump for the cooling distribution circuit is overridden if the pump override is active.
Signal value:
0 = Off
1 = On
Summary of Contents for i-bus KNX AC/S 1.x.1 Series
