ABB i-bus
®
KNX
Parameters
460 2CDC508198D0211 Rev. A | AC/S 1.x.1
Interfaces
Range
Options:
Every 5 seconds of the last 24 hours
Every 1 minute of the last 1 week
Every 15 minutes of the last 1 month
Every 1 hour of the last 1 year
Every 1 hour of the last 3 years
This parameter selects a predefined selection for the duration of the recording and the frequency of the
recording. This setting applies to all values recorded by this module.
Number of trends
Options:
1
2
3
4
5
This parameter specifies how many independent values are to be recorded by the module. An ASM input
socket is activated for each value and the following parameters displayed.
Note
The settings for
Trend 1…5
are explained in the following based on
Trend 1
. The settings are identical
for all trends.
Trend1
Name
Name of the trend line that is displayed on the web user interface.
As long as the name has not been changed manually, it is assigned automatically on linking to an ASM
output socket. The name generated automatically consists of the following:
Name of the module linked:
Name of the output socket linked.
Summary of Contents for i-bus KNX AC/S 1.x.1 Series
