ABB i-bus® KNX
COMMISSIONING
6.5
Software/application
6.5.1
Download reaction
Depending on the PC, it can take up to 90 seconds for the progress bar to appear during a download.
Using an interface that supports download via "long frames" (e.g. USB/S 1.2 or IPR/S 3.5.1) can greatly
shorten the download time.
6.5.2
Copying, exchanging and converting
The following functions can be performed with the ETS application ABB
Update Copy Convert
:
•
Update
: Changes the application program to a higher or lower version while retaining the current con-
figurations
•
Convert
: Transfers/adopts a configuration from an identical or compatible source device
•
Copy channel
: Copies a channel configuration to other channels on a multichannel device
•
Channel exchange
: Exchanges configurations between two channels on a multichannel device
•
Import/export
: Saves and reads device configurations as external files
The ETS application ABB
Update Copy Convert
can be downloaded free of charge from the KNX Shop
→
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B
32
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page
