The method described in this procedure, describes how to use the Distance tool
(3HAC030662-001). The Distance tool can not be used to unload or restore the
pressure of the balancing device spring unit! The Distance tool is only used to
keep the balancing device springs in a locked position, after they have been
unloaded with the help of the robot itself (as described in this procedure) and with
the balancing device still being fitted on the robot.
Note
To unload or restore a balancing device which cannot be done with the help of
the robot itself, the Hydraulic press tool, balancing device (3HAC020902-001)
must be used. See
Unloading the balancing device on page 492
Note
Art. no.
Illustration
Only used to keep the balan-
cing device in a locked posi-
tion, after the balancing
device springs has been un-
loaded with the help of the
robot itself.
3HAC030662-001
Distance tool
xx1400000726
DANGER
Never
use this tool to unload
or restore a balancing
device!
This tool is used to unload or
restore a balancing device
which cannot be done with
the help of the robot itself.
This press tool shall also be
used if the tool shall be fitted
on or be removed from a
balancing device, not fitted
on the robot.
Use this tool:
3HAC020902-001
Hydraulic press tool, balan-
cing device
xx1300000672
•
if the balancing device
shall be unloaded or
restored after it has
been removed from
the robot
•
on a balancing device
not fitted on the robot,
such as a spare part.
DANGER
Never remove or fit the Distance tool on a balancing device which can not be
unloaded by the robot. There is a severe risk of personal injury.
Continues on next page
Product manual - IRB 6700
463
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the balancing device
Continued
Summary of Contents for IRB 6700 Series
