Removing the axis-6 motor
Use these procedures to remove the motor.
Preparations before removing the axis-6 motor
Note
Action
Decide which calibration routine to use,
and take actions accordingly prior to begin-
ning the repair procedure.
1
xx1200001081
Jog the robot to a position where axis 5
can be positioned with the motor pointing
straight up at an acceptable working posi-
tion.
With axis 5 in this position it is possible to
replace the motor without draining the oil
from the axis-6 gearbox.
2
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot
working area.
3
xx1300002247
Remove the wrist cover.
4
Continues on next page
Product manual - IRB 6700
573
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.7.6 Replacing the axis-6 motor
Continued
Summary of Contents for IRB 6700 Series
