1.8.2 Emergency release of the Product axes
Description
In an emergency situation, the brakes on a Product axis can be released manually
by pushing a brake release button.
How to release the brakes is described in the section:
•
Releasing the brake on page 117
.
The carriage may be moved manually if no block in the rail.
Increased injury
Before releasing the brakes, make sure that the weight of the carriage does not
result in additional hazards, for example, even more severe injuries on a trapped
person.
DANGER
When releasing the holding brakes, the Product axes may move very quickly
and sometimes in unexpected ways.
Make sure no personnel is near or beneath the robot.
Product manual - IRT 710
55
3HKA00000186299-001 Revision: B
© Copyright 2023 ABB. All rights reserved.
1 Safety
1.8.2 Emergency release of the Product axes
Summary of Contents for IRT 710
