L ST 3 0 0 |
CO M PAC T U LT R A S O N I C L E V EL T R A N SM I T T ER | L S T 3 0 0 – EN R E V. E
25
3
Press
or
to select the required value .
4
Press
to confirm your selection
Setting a numerical parameter
1
Select the parameter you want to set in the menu .
2
Press
for parameter editing . The currently selected
position is highlighted .
3
Press
to select the decimal position to be changed .
4
Press
or
to select the required level .
5
Press
to select the next position .
6
If necessary, select and set other decimal positions using the
same procedure as described in steps 3 and 4 .
7
Press
to confirm your setting
Setting an alphanumeric parameter
1
Select the parameter you want to set in the menu .
2
Press
for parameter editing . The currently selected
position is highlighted .
3
Press
to select the alphanumeric position to be changed .
4
Press
or
to select the required character .
5
Press
to select the next position .
6
If necessary, select and set other alphanumeric positions
using the same procedure as described in steps 3 and 4 .
7
Press
to confirm your setting
Exiting the setup
Values are mandatory for some menu items . Exit a menu
without parameter change as follows:
1
Press
repeatedly till the cursor is moved to the right .
Once the cursor reaches the end position, “Cancel” is
displayed in the lower right .
2
Press
to terminate editing and exit the menu item . Or
press
to return to the start .
IMPORTANT (NOTE)
The LCD display automatically returns to the process display
three minutes after the last button is actuated .
Overview of parameters at the configuration
level
IMPORTANT (NOTE)
This overview of parameters shows all the menus and
parameters available on the device . Depending on the device
version and configuration, some menus and parameters may
not be visible .
The displayed menu vary in different operation modes . In this
section, menus displayed only in some operation modes are
marked with numbers in brackets . The numbers represent the
operation modes as follows:
• Level
• Flow
• Volume
Refer to section “Menu levels” for a list of operation modes
these numbers represent .
Summary of Contents for LST300 Series
Page 26: ...26 LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E...
Page 27: ...LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E 27...
Page 28: ...28 LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E...
Page 59: ...LST300 COMPACT ULTR ASONIC LEVEL TR ANSMITTER LST300 EN REV E 59 Note...
