![background image](http://html.mh-extra.com/html/abb/lvs-digital/lvs-digital_manual_2837991025.webp)
DIGITAL GATEWAY INSTALLATION
CF CARD INSTALLATION
1TGC908004
17
4.2.
CF Card Installation
The Compact Flash (CF) card is required to start and run the Digital Gateway. The procedure
to create the CF card configuration and copy all mandatory files is described in the MNavi-
gate help file.
Only Industrial Grade CF cards
shall be utilized to ensure correct function of the Digi-
tal Gateway in the switchgear environment!
The CF card slot is located on the Digital Gateway front side. To remove or insert the CF card
the power supply connector must be removed, and the metal cover must be lifted. This en-
sures that CF card can only be removed/inserted while power supply is off.
CF card shall be inserted with the correct side up and with care as the card is mechanically
coded and insertion should not be forced.
The following example shows the ABB standard CF card.
Figure 8 CF Card Insertion
Figure 9 CF Card Insertion Detail
Summary of Contents for LVS Digital
