ABB NEXUS-3 Series Installation And Wiring Download

Page: 2 / 2

Subject to change without notice

WWW.CYLON.COM

BDS0

031

v 1

MOUNTING INSTRUCTIONS

DIN RAIL MOUNTING

Step 1: Decide if the Nexus-3 is to be

Edge

Back

mounted.

•

If it is to be Back mounted, attach the plastic DIN

rail clips to the supplied wall mounting brackets,

and attach the wall mounting brackets to the

Nexus-3 chassis.

•

If it is to be Edge mounted, attach the supplied

Edge DIN rail mounting brackets to the Nexus-3

chassis

Step 3: Clip system to the DIN Rail

DIN Rail Edge Mounting DIN Rail Back Mounting

WALL MOUNT

Step 1: Attach the supplied wall mounting brackets to the

Nexus-3 chassis
Step 2: Mark and prepare holes in the surface to which the

device is to be mounted using these brackets as a template
Step 3: Fasten the device to the mounting surface using

suitable wall fixings

For further information on installing and configuring the NEXUS-3 device see

the NEXUS-3 Series Installation manual:

Summary of Contents for NEXUS-3 Series

Page 1: ...ter and cannot be downgraded to any version prior to this release 1 Remove the NEXUS 3 from its packaging and mount it as describe in Mounting Instruction overleaf 2 Attach the supplied DB9 to screw t...

Page 2: ...supplied Edge DIN rail mounting brackets to the Nexus 3 chassis Step 3 Clip system to the DIN Rail DIN Rail Edge Mounting DIN Rail Back Mounting WALL MOUNT Step 1 Attach the supplied wall mounting br...