7 |
P a g e
OVR-15, 27 & 38 LV cabinet Instruction Manual
Table 1 : Recycle/disposal methods
Raw Material
Recycle
Environmental effects & reuse processes
Iron
Yes
Separate, utilize in favor of new source (ore)
Stainless steel
Yes
Separate, utilize in favor of new source (ore)
Copper
Yes
Separate, utilize in favor of new source (ore)
Brass
Yes
Separate, utilize in favor of new source (ore)
Aluminum
Yes
Separate, utilize in favor of new source (ore)
Zinc
Yes
Separate, utilize in favor of new source (ore)
Thermoplastic
Yes
Make granulate, re-use or apply as energy superior
Rubber
Yes
Cut into pieces & use as high-grade energy
Packing foil
Yes
Cut into pieces & used for landfills
Wooden pallet
Yes
High grade energy additive in refuse incineration
D.
P
RODUCT RELATED SAFETY NOTICES
The OVR-15, 27 & 38® recloser LV cabinet should be installed within the design limitations as described on
its nameplate and in these instructions. In addition, always follow your company’s safety procedures.
For the safety of the personnel performing maintenance operations on the recloser or connecting
equipment, all components should be electrically disconnected by means of a visible break and securely
grounded.
This manual uses terms “ground” & “grounding” as per IEEE. These are equivalent to IEC terms”
earth” and “earthing”.
This manual contains terms and expressions commonly used to describe this kind of equipment.
These instructions do not attempt to provide the user of this equipment every possible answer to
questions which may appear in the application, operation, and maintenance of the product.
Detailed descriptions of standard repair procedures, safety principles, and service operations are not
included. It is important to note that this document contains some warnings and cautions against some
speci
fi
c service methods that could cause personal injury to service personnel or could damage
equipment or render it unsafe. These warnings do not cover every conceivable method in which service
(whether or not recommended by ABB) may be performed.
Secondly, ABB cannot predict or investigate all potential hazards resulting from all conceivable service
methods. Anyone using service procedures or tools, whether or not recommended by ABB, must be
completely certain that both their personal safety and the safety of the equipment will not be jeopardized
by the service method or tools selected.
All information contained in this manual is based on the latest product information available at the time
of printing. The right is reserved to make changes at any time without notice.
