POWERVALUE 11 RT G2
STATUS
Approved
SECURITY LEVEL
Public
DOCUMENT ID.
4NWD005580
REV.
1
LANG.
EN
PAGE
7/12
© Copyright
[Year of first publication]
ABB. All rights reserved.
High level component
Substance(s)
Fasteners
Steel, Cr6+ plated (banned but used in the past)
Steel, zinc plated
Brass, nickel plated
Polyamide
cables
PVC,
Copper (conductor),
Tin (plating),
Ferrites,
Nylon (housing end terminals),
Brass (end terminals).
Heatsinks
Aluminum alloy
The following electrical components require further separation after removal from UPS. They might con-
tain materials or components requiring selective disposal. Contact the manufacturer to get proper in-
structions:
- thermal circuit breakers;
- fans (may contain printed circuit boards).
4.
Dismantling and recycling instructions
DANGER
RISK OF ELECTRIC SHOCK:
- CAPACITORS AND OTHER UPS COMPONENTS MAY STORE NON-LETHAL ENERGY FOR
LONG TIME: HANDLE EVERY CONDUCTIVE PART WITH CARE, AVOIDING SHORT CIRCUIT
CAUSING SPARKING OR ARCING.
- BEFORE DISASSEMBLYING COMPONENTS REQUIRING FURTHER RECYCLING, CONTACT
THE MANUFACTURER TO GET NECESSARY DISPOSAL INFORMATION;
RISK OF INJURY:
THE UPS CONTAINS COMPONENTS WITH HEAVY WEIGHT CAUSING INJURY IS NOT
PROPERLY HANDLED.
RISK OF CUTTING:
THE UPS CONTAINS PARTS OR COMPONENTS THAT MAY BE SHARP: THE
INADVERTENT TOUCH OR PROJECTION MAY RESULT IN INJURY: WEAR SUITABLE
PERSONAL PROTECTIVE DEVICES (PPE).
This section describes the procedure to follow for disassembly. At the end of each subsections, relevant
WEEE or recycling information are reported.
