25
PQSTOR I
I N S TR U C TI O N M A N UA L
5.7 Ethernet configuration
It is possible to operate PQstorI inverter through
Modbus TCP/IP protocol over Ethernet interface.
This can be done through the PQconnecT
Modbus/CAN converter. For more information
about the use of this component, please refer to
the product's manual.
5.8 Open ports
WiFi’s web server uses:
•
Port 80 when SSL/TLS is not required
•
Port 443 when SSL/TLS is used
HMI uses:
•
Port 502 on the Ethernet connection (Modbus
protocol)
5.9 Cyber security disclaimer
note
This product is designed to be connected to
and to communicate information and data via
a network interface. It is user’s sole responsibility
to provide and continuously ensure a secure
connection between the product and user
network or any other network (as the case may
be). User shall establish and maintain any
appropriate measures (such as but not limited
to the installation of firewalls, application of
authentication measures, encryption of data,
installation of anti-virus programs, etc) to protect
the product, the network, its system and the
interface against any kind of security breaches,
unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
ABB Ltd and its affiliates are not liable for
damages and/or losses related to such security
breaches, any unauthorized access, interference,
intrusion, leakage and/or theft of data or
information.
5.10 Commissioning report
Consult the annex of this manual for an overview
of commissioning steps for the PQstorI.