30
T EC H N I C A L SP EC I FI C AT I O N S
Specifications
PQstorI - M
PQstorI - WM
Module
Wall-mounted
Interface/ communication
Wi-Fi communication
Webserver on smartphone or computer for simple diagnostics
and parameters setup
USB
With dedicated optional software (servicing/ programming)
RJ12
For CAN bus communication between
PQconnecT and other modules
CT inputs
3 ph CT measurements (class 1.0 or better, 15 VA)
2x 24Vdc inputs
1 for emergency stop
1 for external supply
230Vac Relay output
For control of external grid contactor/ breaker
PQconnecT
Dimensions (W x D x H)
78 x 25 x 94 mm
IP protection
IP 20
Communications
CAN: RJ12 - 500 kbit/s or 1 Mbit/s
Ethernet: 10/100 Mbit, full or half-duplex, HP Auto-MDIX support
I/O
1 relay output, normally open, 5 A / 30 VDC
Mechanical aspects
Mounting
Modules, suitable to integrate into a cabinet on draws
or as part of a rack system with push connectors
Wall-mounted
Dimensions (W x D x H)
435 x 459 x 130 mm
438 x 199 x 517 mm
Color
-
Surface treated metal frames
Fixation
Special kit allows module to be
integrated into cabinet
via wall-mounting kit
Cable entry
Rear for power cables
Top for power cables
Front for control cables
Bottom for control cables
Compliance with standards
General construction and safety
aspects for PQstorI - M
EN 62477-1 (2012) "Safety requirements for power electronic
converter systems and equipment"
EMC immunity (CE version only)
EN/IEC 61000-6-2, Industrial level
EMC emissions (CE version only)
EN/ IEC 61000-6-4, Class A
Certification
CE
VDE-AR-N 4105:2018-11
VDE-AR-N 4110:2018-11
ENA-EREC G99 (2019)
TF 3.3.1
EN50549-1: 2019
EN50549-2: 2019
1
Limited high voltage ride through support at lower DC voltages