Operation Manual / Power2 340-H / Low-pressure stage
15 Gas piping (option) / 15.4 Storage and disposal
© Copyright 2022 ABB. All rights reserved.
HZTL4053_EN
Rev.F
March 2022
15.4
Storage and disposal
Storing gas piping
The bellows of the gas piping are made of rustproof chromium-nickel steel and can be
stored in their undamaged original packaging for an unlimited time.
They must be stored in such a way that mechanical damage to the parts can be excluded.
See chapter
Storage of new low-pressure and high-pressure stages
.
Disposing of gas piping components
See chapter
15.5
Spare parts
15.5.1
Ordering spare parts
Please quote the following data when making queries and ordering spare parts:
¡
Serial number of Power2 (HT……)
¡
Serial number of the low or high-pressure stage (PT……)
¡
Designation and part number.
Spare parts can be ordered from a Turbo Systems service station.
u
If different model variants are not taken into account in this document, contact a Turbo
Systems service station.
CAUTION
Spare part storage
All spare parts that were ordered together with the low-pressure and/or
high-pressure stage must be kept intact and ready for use.
u
Carefully clean any rusted parts and grease them.
u
Dispose of replaced parts and parts that are not reusable in a professional and environ-
mentally compatible manner.
Page
118
/
122
Summary of Contents for PT003924
Page 2: ......
