A070755 V3 EN
Figure 15:
Last digit is active and it can only be increased
2.
Press
to increase or
to decrease the value of an active digit.
One press increases or decreases the value by a certain step. For integer values,
the change is 1, 10, 100 or 1000 (...) depending on the active digit. Additionally,
for decimal values, the change can be fractions 0.1, 0.01, 0.001 (...) depending
on the active digit.
3.
Press
or
to move the cursor to another digit.
4.
To select the minimum or maximum value, select the arrow symbol in front of
the value.
•
To set the value to the maximum, press
.
•
To set the value to the minimum, press
.
A070756 V3 EN
Figure 16:
Arrow symbol is active, the value is set to the maximum
After pressing
, the previous value can be restored by pressing
once, and
vice versa. Another press of
or
sets the value to the lower or higher limit.
The symbol in front of the value is ↕, when the previous value is shown.
A070757 V3 EN
Figure 17:
Restoring the previous value
4.1.11.2
Editing string values
1.
Activate the setting mode and select a setting.
Section 4
1MRS756499 A
Using HMI locally or via web interface
36
RED615
Operation Manual
