GUID-E10EE091-CFB9-4278-9FA4-7340C26F5814 V3 EN
Figure 30:
Warning indicating that the values were not written to the
IED
If you accidentally click
Enable Write
, click
Disable Write
.
However,
Disable Write
is not selectable if some value has already
been written to the IED. If
Write to IED
has been clicked, you can
only
Commit
or
Reject
.
4.2.7
Committing settings
Editable values are stored either in RAM or in non-volatile flash memory. Values
stored in flash memory are in effect also after reboot.
Some parameters have an edit-copy. If editing is cancelled, the values with an edit-
copy are immediately restored to the original value. The values without an edit-copy,
such as string values, are restored to the original value only after a reboot even though
the edited value is not stored in the flash memory.
1.
Click
Write to IED
after editing parameter values to put the values into IED's
database for use.
Section 4
1MRS756499 A
Using HMI locally or via web interface
48
RED615
Operation Manual
