HAZARDOUS VOLTAGE.
WILL CAUSE SEVERE
INJURY OR DEATH.
Turn OFF power supplying this
equipment before working inside.
Kit Contains:
Cover
1
Base
1
Hasp
1
Screws
4
• Turn “OFF” power supplying the meter module.
• Remove damaged Breaker Access Cover and retain
mounting screws.
• Secure the Hasp and Cover to the Base prior
to installation.
• Mount Breaker Access Cover to the Meter Module
front cover with the mounting screws.
• Torque screws to 25 in. lbf.
1T
Q
C
13
30
00
E
00
0
9 R
ev
.A
S
ep
te
m
b
er
2
0
23
Please read these instructions
completely before installing
or removing device. Improper
installation could be hazardous
to personnel and/or equipment.
—
INSTA LL ATION INSTRUC TIONS
ReliaMod™ Modular Metering
RTBCOVER
—
ABB Inc.
305 Gregson Drive
Cary, NC 27511
United States
—
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With regard
to purchase orders, the agreed particulars
shall prevail. ABB Inc. does not accept any
responsibility whatsoever for potential
errors or possible lack of information
in this document.
We reserve all rights in this document
and in the subject matter and illustrations
contained therein. Any reproduction,
disclosure to third parties or utilization
of its contents – in whole or in parts – is
forbidden without prior written consent
of ABB Inc. Copyright© 2023 ABB
All rights reserved
electrification.us.abb.com/reliamod
Para consultar las instrucciones
en español, véase la página 2
Cover
Base
Hasp
