The display view is divided into four basic areas.
1
3
4
2
GUID-24ADB995-439A-4563-AACE-1FAA193A8EF9 V1 EN
Figure 3:
Display layout
1 Header
2 Icon
3 Content
4 Scroll bar (displayed when needed)
2.4.2
LEDs
The LHMI includes three protection indicators above the display: Ready, Start and
Trip.
There are also 8 programmable LEDs on front of the LHMI. The LEDs can be
configured with the LHMI, WHMI or PCM600.
2.4.3
Keypad
The LHMI keypad contains push buttons which are used to navigate in different views
or menus. With the push buttons you can give open or close commands to one object
in the primary circuit, for example, a circuit breaker, a contactor or a disconnector. The
push buttons are also used to acknowledge alarms, reset indications, provide help and
switch between local and remote control mode.
1MRS757455 E
Section 2
REB611 overview
REB611
13
Application Manual
