background image

LD0.ARCSARC3 Arc protection (3) – AFD-3................................26
LD0.CCBRBRF1 Circuit breaker failure protection (1) – 50BF-1..26
LD0.CCSPVC1 Current circuit supervision (1) – CCM-1..............27
LD0.CMMXU1 Three-phase current measurement (1) – IA,

IB, IC.............................................................................................27
LD0.DEFLPDEF1 Directional ground-fault protection, low

stage (1) – 67/51N-1.....................................................................27
LD0.DOPPDPR1 Reverse power/directional overpower

protection (1) – 32O-1...................................................................28
LD0.DOPPDPR2 Reverse power/directional overpower

protection (2) – 32O-2...................................................................28
LD0.DOPPDPR3 Reverse power/directional overpower

protection (3)................................................................................ 28
LD0.DUPPDPR1 Underpower protection (1) – 32U-1.................. 29
LD0.DUPPDPR2 Underpower protection (2) – 32U-2.................. 29
LD0.EFHPTOC1 Non-directional ground-fault protection,

high stage (1) – 50G-1..................................................................29
LD0.EFHPTOC2 Non-directional ground-fault protection,

high stage (2) – 50G-2..................................................................30
LD0.EFLPTOC1 Non-directional ground-fault protection low

stage (1) – 51G-1..........................................................................30
LD0.ESMGAPC1 Emergency start-up (1) – 62EST-1.................. 30
LD0.FRPFRQ1 Frequency protection (1) – 81-1..........................30
LD0.FRPFRQ2 Frequency protection (2) – 81-2..........................31
LD0.HIAPDIF1 High-impedance differential protection for

phase A (1)...................................................................................31
LD0.HIBPDIF1 High-impedance differential protection for

phase B (1) – 87B-1......................................................................32
LD0.HICPDIF1 High-impedance differential protection for

phase C (1) – 87C-1..................................................................... 32
LD0.JAMPTOC1 Motor load jam protection (1) – 51LR-1............ 32
LD0.JAMPTOC2 Motor load jam protection (2) – 51LR-2............ 32
LD0.LEDGGIO1 Indication LED states Color1/Color2 – LED.......33
LD0.LEDGGIO1 Indication LED states OFF/ColorX – LED..........34
LD0.LEDPTRC1 Global conditioning (1)...................................... 35
LD0.LEDPTRC1 Global conditioning - phase information (1)...... 35
LD0.LOFLPTUC1 Loss of load supervision (1) – 37M-1.............. 36
LD0.LOFLPTUC2 Loss of load supervision (2) – 37M-2.............. 36
LD0.MAPGAPC1 Multipurpose protection (1) – MAP-1............... 36
LD0.MAPGAPC2 Multipurpose protection (2) – MAP-2............... 37
LD0.MAPGAPC3 Multipurpose protection (3) – MAP-3............... 37

Table of contents

2

REM615 ANSI

Point List Manual

Summary of Contents for Relion 615 series





















































































































Reviews: