When editing an enumerated value, the selected value is shown inverted.
2.
Press
or
to change the value of an active enumerated value.
One press changes the enumerated value by one step in the parameter specific
order.
4.1.12.4
Changing the time settings in LHMI
1.
Select
Main menu/Configuration/Time/System time
.
The change takes effect immediately.
2.
Press
to confirm the selection.
•
Press
to remove the changes.
4.1.13
Saving settings
Editable values are stored in the non-volatile flash memory. Most of the parameter
changes take effect immediately after storing, but some parameter changes require
application restart. Values stored in the flash memory remain in effect after reboot as
well.
1.
Press
to confirm any changes.
2.
Press
to move upwards in the menu tree or
to enter the Main Menu.
3.
To save the changes in non-volatile memory, select
Yes
and press
.
A071206 V2 EN
Figure 27:
Confirming settings
•
To exit without saving changes, select
No
and press
.
•
To cancel saving settings, select
Cancel
and press
.
Pressing
Cancel
in the Save changes dialog closes only the Save
changes dialog box, but the IED remains in editing mode. All the
changes applied to any setting are not lost and the user can continue to
change settings. To leave the change setting mode, select
No
or
Yes
in the Save changes dialog.
1MRS756509 E
Section 4
Using the HMI
630 series
45
Operation Manual
