4.2.6
Editing values
1.
Click the menu in the WHMI tree.
2.
Click the submenu to see function blocks.
3.
Click a function block to see the setting values.
4.
Click
Enable Write
.
Some parameters, for example, the IED test mode, cannot be set
via the WHMI.
A071244 V2 EN
Figure 34:
Enable writing to edit a value
The selected setting group is shown in the Setting Group drop-down list. The
active setting group is indicated with an asterisk *.
5.
Edit the value.
•
The minimum, maximum and step values for a parameter are shown in the
Min., Max. and Step columns.
•
Setting group values are indicated with .
1MRS756509 E
Section 4
Using the HMI
630 series
51
Operation Manual
