6.1.1.3
Monitoring an internal IED fault
The flashing green LED indicates an internal IED fault. The fault messages are found
in the LHMI menu.
1.
Select
Main menu/Monitoring/Internal events
or
Main menu/
Monitoring/IED status
to monitor the latest fault indication.
2.
Press
or
to scroll the view.
GUID-97CDE6AD-01D5-495E-A213-BFC70E89E145 V3 EN
Figure 49:
Fault indication
The internal event list is not updated dynamically. To update the list,
leave the
Internal events
menu and then select it again.
6.1.1.4
Monitoring condition monitoring data
1.
Select
Main menu/Monitoring/I/O status/Monitoring
.
2.
Press
or
to scroll the view.
With PCM600 the user can map output signals from condition monitoring related
function blocks to the appropriate destinations.
6.1.2
Measured and calculated values
All values show the momentary measurement value and some include demand values
calculated from a set period.
Measured and calculated values can be accessed through the LHMI, WHMI and
PCM600. Measured and calculated values are based on the RMS mode. These values
Section 6
1MRS756509 E
Operating procedures
68
630 series
Operation Manual