•
The right window shows tabs for possible communication channels.
•
The left window has a drop down menu for signal selection and buttons for
signal movement.
IEC09000689-1-en.vsd
IEC09000689 V1 EN
Figure 104:
CMT: Container window design when selecting DNP3 protocol
4.
To move signals, select one or several signals.
•
Click in the list of signals to select one signal.
•
Press SHIFT or CTRL and several signals to select a set of signals.
•
Right-click in the list of signals, select
Select All
from the context menu or
press CTRL+A to select all signals.
5.
Press the blue arrow button to insert the selected signals into the configuration.
6.
Press the green double arrow button to insert all signals into the configuration.
IEC08000361.vsd
IEC08000361 V1 EN
Figure 105:
CMT: Move buttons
7.
Click the
Signal Type
drop down list to select the other signal types for this
channel.
8.
Repeat to move signals for all signal types and save the selection.
Content changes in the DNP3 container are marked with a star at the
end of the name. The star indicates that changes in the container have
to be saved before leaving CMT.
1MRS756800 F
Section 9
DNP3 communication engineering
630 series
133
Engineering Manual
