2
3
6
7
4
5
1
5
GUID-36783A5D-1F19-45B1-88E7-D1B18912A451 V1 EN-US
Figure 7:
Mounting IEDs
1 Upper mounting bracket
2 Vent holes
3 Right mounting bracket
4 Lower mounting bracket
5 Screws
6 Left mounting bracket
7 Middle mounting brackets
4.
Tighten the screws.
5.
Mount the left and right mounting brackets to both sides of the IED assembly using
fixing screws.
6.
Tighten the screws.
7.
Mount the IEDs with the rack mounting panels to the 19" rack.
8.
Tighten the screws.
Section 5
1MRK 514 014-UEN A
Mounting
22
650 series
Installation manual
© Copyright 2011 ABB. All rights reserved